Home > Altronix >

  Altronix AL1002ULADAJ NAC Power Extender

AL1002ULADAJ Altronix | JMAC Supply


 
Limited Stock
Usually Ships Same or
Next Business Day
Our Price: $567.99
Sale Price: $464.77
You save $103.22!

Product Code: ALTRONIX-AL1002ULADAJ
Qty:

Description
 
Product Summary:

Altronix AL1002ULADAJ NAC Power Extender


NAC POWER EXTENDER - 24VDC AT 10 AMP. 2 - CLASS A OR 4 - CLASS B NAC CIRCUITS, OPERATES 2-WIRE HORN/STROBES, GENERATES





Model AL1002ULADAJ is an extremely cost effective 10 amp voltage regulated remote power supply/battery charger. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories. The unit delivers regulated and filtered 24 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. The 10 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of 4 amp is achieved by paralleling 2 outputs. In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals (NC, C, NO) which are used to indicate general loop/system trouble. A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs. The unit also features “Loop Output” trouble memory indication to help identify troublesome sporatic problems. Model is available in a smaller enclosure AL1002ULADA.

*Incomplete product listing. Our listing for Altronix AL1002ULADAJ is under construction. Please contact us for more information.

Features
  • Power Supply/Charger:
  • 24VDC output
  • 10 amp max total alarm current
  • 115VAC 60Hz., 4.4 amp
  • Short circuit and thermal overload protection
  • Built-in charger for sealed lead acid or gel type battery backup
  • Maximum charge current .7 amp
  • Zero voltage drop upon transfer to battery backup
  • AC input and DC output LED indicators
  • AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
  • Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC)
  • Lifetime Warranty

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop by Brand > Altronix > Power Supplies
Shop by Brand > Altronix
Altronix
Shop by Brand > Altronix > View All Altronix Products
Shop by Brand > Altronix > Power Supplies > Fire Alarm Power Supplies

Nextag Seller

Copyright ©  JMAC Supply. All Rights Reserved. Ecommerce Site Design by Volusion.