 |
 |
 |
|
Product Summary:
Avalan AW900ITR 900 MHz Indoor Wireless Ethernet Radio AW900iTR
The same radio module from our popular AW900xTR but in a convenient small low cost package for indoor applications
This new product allows you to build non-line-of-sight, point-to-multipoint wireless Ethernet connections that connect "fringe" IP devices, including IP access control readers, remote printers, remote PCs, VoIP phones, point-of-sale devices, digital signage or industrial control devices.
The AW900iTR radios include a built-in spectrum analyzer and they are IP addressable with web browser based remote configuration and diagnostic tools included. AvaLAN's products offer the ideal combination of price, range, data rate, security, interference avoidance, quality-of-service, and a simple plug and play set up with minimal user programming required.
With non line-of-site capabilities, these radios can easily penetrate indoors up to 1,500' or through 10 building walls and supports industrial-grade temperature ranges. The system configuration can include up to 12 access points – each on its own non-overlapping channel (up to 192 subscriber units across a given site with 16 active clients per access point). These products are an ideal replacement for modest data rate installations where 802.11 systems are under-performing or failing completely due to insufficient range or excessive interference.
*Incomplete product listing. Our listing for Avalan Wireless AW900ITR is under construction. Please contact us for more information.
- RF transmission rate: 1.536 Mbps
-
- Ethernet throughput: 935 Kbps
-
- Output power: +21 dBm (4 Watts EIRP when used with 15 dBi antenna)
-
- Receiver Sensitivity: -97 dBm at 10-4 BER
-
- Radio link budget: 118 dB plus 2x antenna gain
-
- Range: 40 miles line-of-sight with 15 dBi antenna
-
- RF channels/bandwidth: 12 non-overlapping channels with 2.0833 MHz spacing and 1.75 MHz bandwidth
-
- Frequency selection: Automatic or manually selectable via web browser interface.
-
- Connector types: RF - RPTNC Female / 10/100 base T Ethernet RJ-45 / Power P5-2 2.1 mm
-
- Status LEDs: Power, Ethernet link, RF TX, RF RX, Channel (4), Link Quality (6)
-
- Error correction technique: Sub-block error detection and retransmission
-
- Adjacent band rejection: SAW receiver filter attenuates cellular and pager interference
-
- Power regulation: Built-in switching regulator
-
- Browser management tools: QoS Statistics, Network Settings, Spectrum Analyzer, Firmware Upgrade
-
- Power consumption: Transmit: 1.7 Watts Receive: 0.8 Watts
-
- Voltage: 6 to 48 VDC via P5 power jack; 9 to 48 VDC via unused pins in RJ-45 jack - pins 4,5 positive, 7,8 ground
-
- Transmit current draw: 175 mA at 9 VDC; 140 mA at 12 VDC; 35 mA at 48 VDC
-
- Temperature range: -40° C to +70° C
-
- Compatibility: May be mixed in combination with AW900xTR and AW900xTP radios, not compatible with older AW900x, AW900xT, AW900i and AW900iT
-
- Size:135 x 85 x 35 mm (not including connectors)
-
- Weight: 180 grams
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Built-in spectrum analyzer
-
- 128 bit AES encryption, FIPS 197 - NIST Certified
-
- Remote diagnostics and link analysis with browser interface
-
- Radio can be configured as an access point or client
-
- Simple plug and play — minimal user programming required
-
- Install up to 16 clients per access point
-
- Can operate up to 12 access points, each on its own non-overlapping channel
-
- Does not require an FCC license to operate or install
-
- High RF output power provides maximum foliage and / or wall penetration
-
- Indoor range, up to 10 building walls
-
- Line-of-sight range up to 40 miles with 15 dBi antenna
-
- 2.5 dBi Omnidirectional antenna included
-
- Six other optional antennas are available with up to 15 dBi directional gain
-
- Available as individual radios for multi-point systems or as a pre-configured matched pair bridge
|
|
|
|
|
|
|
|
|
