Browse Products

Featured Brands

Home > Gentex >

Gentex WGESG24PWR Outdoor Color Strobe with Back Box (Green/Red)

Our Price: $84.99
Sale Price: $68.87
You save $16.12!

Product Code: GENTEX-WGESG24PWR

Discontinued, Call For Replacement

Description

Technical Specs

Extended Information

Product Summary:

Gentex WGESG24PWR Outdoor Color Strobe with Back Box (Green/Red)

Outdoor Low Profile Green Strobe with Red Faceplate and Back Box

The Gentex WGESG24PWR (part no. 904-1355) is an Outdoor, Low Profile Green Strobe with Red Faceplate and Back Box.

Gentex Fire Protection Popular Searches
Gentex 710 Gentex 7100 Gentex 7100f Gentex 9120 Gentex 9123 Gentex Accessories Gentex horn strobes Gentex Bells and Speakers Gentex Carbon Monoxide Alarms Gentex smoke alarms and detectors Gentex fire alarm
Gentex Fire Protection Official Website

The audible and/or visible signal shall be Gentex WGE Emergency Notification Evacuation Series or approved equal and shall be listed by Underwriters Laboratories Inc. per UL 1638 and/or UL 464. The notification appliance shall also be listed with the California State Fire Marshal (CSFM) and the Bureau of Standards and Appeals (NYC).
The notification appliance (combination audible/visible) shall produce a peak sound output of 100dBA or greater at as measured in an anechoic chamber. The signaling appliance shall also have the capability to silence the audible signal while leaving the visible signal energized with the use of a single pair of power wires. Additionally, the user shall be able to select either continuous or temporal tone output with the temporal signal having the ability to be synchronized.
The audible/visible and visible signaling appliance shall also maintain a minimum flash rate of 1Hz or up to 2 Hz regardless of power input voltage. The appliance shall have an operating current of 112mA or less for the 75Cd strobe circuit. The appliance shall also be capable of meeting the candela requirements of the ADA (75cd).
The appliance shall be polarized to allow for electrical supervision of the system wiring. The unit shall be provided with a mounting bracket with terminals with barriers for input/output wiring and be able to mount to a single gang or double gang box or double workbox without the use of an adapter plate. The unit shall have an input voltage range of 16-33 volts with either direct current of full wave rectified power for 24 volt models.
The appliance shall be capable of testing supervision without disconnecting wires. Also the appliance shall be capable of mounting to a surface back box. The unit shall also be able to verify voltage at the unit without removing unit.
The appliance has extended temperature range of -31 ° to 150°F (-35° to 66° C). The appliance shall satisfy virtually all outdoor and severe environment applications. The GOE Enclosure is includes a gasket that must be inserted between the box and mounting bracket. There are drain holes in the back box to allow for drainage, the seal on the GOE Enclosure is not water tight. The GOELP Enclosure includes a weather seal for mounting to wall and intended for use with universal electrical box. To allow for drainage, bottom edge of enclosure is not water tight.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop by Brand > Gentex
Shop by Brand > Gentex > Gentex Audible/Visual Signaling Appliances (Horns & Strobes)
Gentex
Shop by Brand > Gentex > View All Gentex Products
Shop by Brand > Gentex > Gentex Audible/Visual Signaling Appliances (Horns & Strobes) > Gentex Emergency Communication System WGE Series