Home > System Sensor >

  System Sensor BEAM1224 4-wire Single-Ended Beam Smoke Detector

BEAM1224 System Sensor | JMAC Supply
 
In Stock
Usually Ships Same or
Next Business Day

Our Price: $620.00


Product Code: SYSTEM-SENSOR-BEAM1224
Qty:

Description
 
4-wire, single-ended, reflected type beam smoke detector that includes an 8" reflector



System Sensor's BEAM1224 is a four-wire conventional reflected beam smoke detector, which is uniquely suited for protecting open areas with high ceilings, where other methods of smoke detection are difficult to install and maintain.

BEAM1224 is to be used with UL Listed compatible control panels only. An advantage of this single-ended reflective design is that it is much easier to install the BEAM1224 than the dual-ended projected beam detectors. Alignment is quickly accomplished via an optical sight and a two-digit signal strength meter incorporated into the product.

Another advantage of the BEAM1224 is that it is listed for operation in temperatures ranging from - 22 degreesF to 131 degreesF. This means it can be used in open areas to provide early warning in environments where temperature extremes may exceed the capability of other types of smoke detectors. BEAM1224 consists of a transmitter/receiver unit and a reflector. When smoke enters the area between the unit and the reflector, the smoke causes a reduction in the signal. When the smoke level reaches the predetermined threshold, an alarm is activated

BEAM1224 has four standard sensitivity selections, along with two Acclimate settings (adjustable sensitivity). When one of the two Acclimate settings is selected, the detector will automatically adjust its sensitivity using advanced software algorithms to choose the optimum sensitivity for the specific environment. BEAM1224S is also equipped with an integral sensitivity test feature, which consists of a test filter attached to a servo motor inside the detector optics.

When the remote test station RTS451/RTS151 is used, the motor is activated and moves the filter into the pathway of the light beam, to test the detector's sensitivity. This integral sensitivity test feature allows the user to quickly and easily meet the annual maintenance and test requirements of NFPA 72.


Average Customer Review: 5 of 5 | Total Reviews: 2 Write a review.

  9 of 9 people found the following review helpful:
 
Review left on 6/27/2013
Reviewer: Dulce Melton from Morris Plains, NJ  
Purchased the System Sensor BEAM1224

Was this review helpful to you?

  9 of 9 people found the following review helpful:
 
Review left on 4/20/2013
Reviewer: Sara Lopez from Warsaw, IL  
Purchased the System Sensor BEAM1224

Was this review helpful to you?


Browse for more products in the same category as this item:

System Sensor
Shop by Brand
Shop by Brand > System Sensor
Shop by Brand > System Sensor > Intelligent Detection
Shop by Brand > System Sensor > Conventional Detection
Shop by Brand > System Sensor > Conventional Detection > Beam Detectors
Shop by Brand > System Sensor > Intelligent Detection > Beam Smoke Detectors
Fire & Life Safety
Fire & Life Safety > Detectors & Initiation Appliances
Fire & Life Safety > Detectors & Initiation Appliances > Beam Detectors

Nextag Seller

Copyright ©  JMAC Supply. All Rights Reserved.Built with Volusion