Home > System Sensor >

  System Sensor CO1224T 12/24V 4-wire Carbon Monoxide Detector

CO1224T System Sensor | JMAC Supply
 
In Stock
Usually Ships Same or
Next Business Day

Our Price: $64.00


Product Code: SYSTEM-SENSOR-CO1224T
Qty:

Description Product Resources Accessories
 

System Sensor CO1224T 12/24V 4-wire Carbon Monoxide Detector


The System Sensor CO1224T CO detector provides early warning by using electrochemical sensing technology to measure carbon monoxide levels in the air.

The CO gas sensing cell of the CO1224T CO detector can be tested using a carbon monoxide gas agent. If a dangerous amount of carbon monoxide is detected, the CO1224T detector will alert residents by sounding and flashing a temp-4 signal alarm. Protection is guaranteed 24/7 by a central station, regardless of whether residents are away from home, sleeping, or already suffering from the effects of CO.

The detector is fully listed to UL 2075. It offers a code required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. It also uses SEMS-type terminal Philips head screws for quicker wiring connection and code required wiring supervision. The CO1224T detector has a low current draw, which allows for more devices to be connected to the panel without having to purchase a more expensive panel or an extra power supply.

The CO1224T is comnpatible with most industry security and fire alarm control panels because it is a 12/24VDC detector.
Features:
  • RealTest enables a functional test using canned CO
  • Full compliance with UL 2075
  • A code-required trouble relay
  • Wiring supervision with SEMS terminals
  • A six-year end-of-life timer
  • 12/24 VDC
  • A low current draw of 20 mA in standby and 40 mA in alarm
  • Versatile mounting for wall and ceiling
  • Accurate and reliable electrochemical sensing technology
  • Optional CO-PLATE CO Detector Replacement Plate to upgrade previously installed competitor detectors to the CO1224T
Technical Specifications:
  • Sounder: 85 dB in alarm
  • Operating Voltage: 12/24 VDC
  • Alarm Current: 40 mA (75 mA test)
  • Standby Current: 20 mA
  • Alarm Contact Ratings: 0.5 A @ 30 VDC
  • Operating Temperature Range: 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C)
  • Operating Humidity Range: 22 to 90% RH
  • Dimensions: Length: 5.1 in, Width: 3.3 in, Height: 1.3 in;
  • Weight: 7 oz
  • Mounting: Single-gang back box; surface mount to wall or ceiling


Average Customer Review: 5 of 5 | Total Reviews: 2 Write a review.

  7 of 7 people found the following review helpful:
 
Review left on 5/7/2013
Reviewer: Rickey Crosby from Williams, MN  
Purchased the System Sensor CO1224T

Was this review helpful to you?

  9 of 9 people found the following review helpful:
 
Review left on 6/19/2013
Reviewer: Tania Perry from Welcome, MD  
Purchased the System Sensor CO1224T

Was this review helpful to you?


Browse for more products in the same category as this item:

System Sensor
Shop by Brand
Shop by Brand > System Sensor
Shop by Brand > System Sensor > Conventional Detection
Shop by Brand > System Sensor > Conventional Detection > Carbon Monoxide
Fire & Life Safety
Fire & Life Safety > Detectors & Initiation Appliances
Burglar Alarms
Burglar Alarms > Life Safety
Burglar Alarms > Life Safety > Carbon Monoxide Detectors
Fire & Life Safety > Detectors & Initiation Appliances > CO Detectors

Nextag Seller

Copyright ©  JMAC Supply. All Rights Reserved.Built with Volusion